🚨Perma Spoofer

Download the loader

Comprehensive Windows Installation and Setup Guide

Preparation

1. Create Windows 10 USB Drive

   • Use the Media Creation Tool.

   • Follow this video tutorial.

1. Important Note for Windows 11 Users

   • Reinstall with Windows 10 before using the program.

2. Download Drivers

   • Download 3DP or Realtek driver file and place it on the root of your USB.

   • Locate the file in the folder you received after purchase.

   • For a visual reference, watch this video.

Pre-Installation Steps

1. Disable Wi-Fi and Bluetooth

   • Via BIOS or physically remove them.

2. Flash BIOS

   • Disable Wi-Fi, Bluetooth, and TPM after updating BIOS.

3. Run the Program

   • Run the program before reinstalling.

   • Copy your current serials for reference.

BIOS Setup

1. Enter BIOS

   • Restart PC and press the BIOS key (usually "DEL").

   • Refer to your motherboard documentation if "DEL" doesn't work.

2. Configure Boot Options

   • In BIOS, go to the BOOT section and set "Boot Option #1" to your USB drive ("USB Partition 1").

   • Disable TPM in the "Advanced" tab.

3. Save and Exit

   • Save changes and exit BIOS.

   • The PC will restart and display the Windows 10 installation screen.

Windows 10 Installation

1. Follow Installation Guide

   • Watch this video for detailed steps.
2. Flash BIOS Update

   • Download the latest BIOS update from your motherboard support page.

   • Reformat the flash drive to FAT32, place the unzipped BIOS file on it, and follow your motherboard's instructions to flash the BIOS.

3. Go back into bios after the updating the bios and turn off TPM/Secure Boot again.

Completion

• Enjoy your new HWID and a fresh install of Windows 10!